Let’s Talk About the 350mm 1500W White Coating Halogen Lamp
We built this 350mm infrared lamp for one reason: raw, concentrated heat. Packing 1500W into a relatively short quartz tube means you aren’t waiting around. It hits your target temperature in seconds. It’s fast. Really fast. And that’s a huge win when you’re trying to keep a production line moving. The secret to the heat Because we’ve crammed so much power into such a small space, the heat footprint is tight. To keep the lamp from burning itself out, we use halogen gas inside the quartz. This stops the filament from evaporating too quickly, so the lamp actually lasts. Plus, you get a level of infrared penetration that just blows standard medium-wave heaters out of the water. It goes deeper into the material, which is exactly what you want for a proper cure. Why the white coating matters You might look at the white coating and think it’s just for looks. It’s not. Think of it as a mirror. It pushes the infrared radiation forward, aiming the heat right at your workpiece instead of letting it waste away into the lamp housing. It turns the whole thing into a directional heat beam. One quick tip: keep your reflectors clean. If dust builds up on that white coating, you’ll get hot spots. And hot spots are the fastest way to kill a tube. Getting it installed These are designed to be easy drop-in replacements for your industrial drying or curing lines. The 350mm length should slide right into most standard brackets without a fight. Just a heads-up—double-check your voltage before you flip the switch. If the voltage is off, you’ll pop the filament instantly. Not a great way to start the day. Also, remember that 1500W in a small package creates a lot of heat at the ends. Check your sockets. If they’re cheap or undersized, the plastic will literally warp under the load. Keep your airflow open and your connectors cool, and you’ll be golden.