2000w white cover halogen ir heater lamp

May 6, 2026

Introduction

So, here’s the thing. We built this 2000W halogen infrared heater lamp for the engineers who need serious, focused heat—but without taking up a ton of space. It’s a shortwave IR powerhouse, made for industrial jobs where you need heat, fast, and you need to be able to control it with precision. It packs a full 2000W of punch, but in a size that’s a breeze to mount and just keeps on running, even when the production line is running full tilt.

Let’s Get Into the Details

That 2000W rating? It wasn’t an accident. It’s all about giving you enough power to heat up small areas almost instantly, without forcing you to deal with a bulky, oversized unit. It runs on a high-voltage supply, which is a clever move. It keeps the current lower than other options, which means less voltage drop and you don’t have to use oversized wiring. And the tube is just the right length for the typical focus distance, so you get a clean, defined heating zone without the heat spilling over where you don’t want it.

The Design, Up Close

That white cover is actually a fused quartz envelope, and it’s got a special reflective coating. This coating bounces the IR energy right back onto the filament and through the tube. The result? You get more effective output, and it keeps stray radiation from heating up everything else around it. The halogen cycle is doing its job, too, keeping the filament clean even at scorching temperatures. This means the output stays stable over the life of the lamp. And the R7s base is a real workhorse. It’s a double-ended, linear connector that can handle extreme heat and gives you solid mechanical support. It lines the tube up perfectly in the reflector and makes the wiring dead simple—no extra socket hardware to mess with.

Where It Shines (And What to Watch For)

This lamp is your go-to for jobs that need fast, targeted heat. Think plastic welding, curing coatings, or drying out components. Because it responds so quickly, you can flip it on and off with ease, which is perfect for keeping tight control over the temperature in an automated setup. The white cover design also cuts down on the harsh glare and helps limit heat loss from convection, so you get better thermal efficiency, especially in enclosed spaces. And when it’s time for a replacement, that R7s interface makes it quick, so you can get the line back up and running with minimal downtime. Now, the one thing to keep in mind is heat. This is a 2000W shortwave halogen source, so it runs hot. You’ve got to make sure the machine has enough clearance, proper airflow, or some shielding. Plan your heat extraction and mounting orientation from the start, and you’ll get that consistent, predictable heat with almost no fuss.